Home › Forums › Vintage EHX › Vintage Micro Synth sliders?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 14, 2017 at 11:33 pm #84741
    devnulljp
    Participant

    Got a vintage big box Micro Synth and a few of the sliders are broken. They still kinda work, but the tab used to move them is broken off.
    Any idea what to replace them with and where to get them?

    Also, I modded my old QTron so the indicator light showed when the effect was on/off rather than just powered. Anyone done the same to a Microsynth? I’d like to fix that too.

    Thanks

    EE5B3744-A9F8-4F7F-8652-D0BDBDA16534_zpslata2uhf.jpg

    January 17, 2017 at 10:43 pm #122515
    devnulljp
    Participant

    Never mind, I found the pots on Smallbear : http://smallbear-electronics.mybigcommerce.com/potentiometer-cts-slide-for-old-micro-synth/

    And this thread on Talkbass for the switch thing: https://www.talkbass.com/threads/ehx-bass-micro-synth-diy-true-bypass-mod.315187/#post-5112451

    June 24, 2022 at 4:39 am #191383
    pbraem
    Participant

    Hi, I’ve seen that you already solved the problems with the broken sliders, that’s why I came looking here on the forum. Thanks for the tip. And a few years ago I also modded my old Microsynth so the indicator light showed when the effect was on/off rather than just powered, I found that more usefull. But you also found a solution for that problem. There you go ! Regards, Pascal (Belgium)

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.