Home › Forums › Vintage EHX › Vintage Electric Mistress 18V – power supply info…?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 23, 2012 at 4:50 am #82183
    BigStone
    Participant

    Hello,

    I just ordered a vintage Electric Mistress pedal, the older one with green lettering. To my knowledge this is an 18V pedal (accepts two 9V batteries).

    I’ve never actually seen one of these pedals in person. Do they have an input jack for an external power supply? If so, what type of input is it (1/8″ jack, or…)? Is there a current power supply unit that can be purchased that will work with this pedal?

    I do have a power supply “brick” with an 18V output… hopefully it would just be a matter of me getting a cord with the right jack on the end to fit the pedal.

    Any other info regarding this subject appreciated.

    (PS – I never use batteries in my pedals, always use external power, so hopefully I can figure out an external power option for my new vintage EM. Thanks!)

    February 23, 2012 at 10:37 am #116994
    The EH Man
    Moderator

    It has a 1/8″ jack on the back for an 18vdc supply. The plug is 1/8″, positive tip.

    February 23, 2012 at 3:57 pm #116998
    BigStone
    Participant
    Quote:
    It has a 1/8″ jack on the back for an 18vdc supply. The plug is 1/8″, positive tip.

    Beautiful. I have a power brick with an 18V output and a cord for the brick with 1/8″ jack, positive tip… looks like I’m all set.

    Thanks so much EH Man, you’ve been incredible helpful.

    May 8, 2012 at 8:47 pm #117499
    synthaxe
    Member
    Quote:
    It has a 1/8″ jack on the back for an 18vdc supply. The plug is 1/8″, positive tip.

    Hey EH Man,

    I have a small clone and an issue j small stone. Both have the 1/8″ input for power supply on the back. Where can I get the correct supplies for these? 1/8″….? Thanks.

    May 8, 2012 at 9:53 pm #117503
    The EH Man
    Moderator
    Quote:
    Hey EH Man,

    I have a small clone and an issue j small stone. Both have the 1/8″ input for power supply on the back. Where can I get the correct supplies for these? 1/8″….? Thanks.

    http://www.ebay.com/itm/electro-harmonix-9DC100-9-Volt-AC-Adapter-/120897551288?pt=LH_DefaultDomain_0&hash=item1c260e3bb8#ht_500wt_969

    May 9, 2012 at 12:38 am #117504
    synthaxe
    Member
    Quote:
    Quote:
    Hey EH Man,

    I have a small clone and an issue j small stone. Both have the 1/8″ input for power supply on the back. Where can I get the correct supplies for these? 1/8″….? Thanks.

    http://www.ebay.com/itm/electro-harmonix-9DC100-9-Volt-AC-Adapter-/120897551288?pt=LH_DefaultDomain_0&hash=item1c260e3bb8#ht_500wt_969

    Much appreciated..

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.