Home › Forums › Vintage EHX › Vintage Ehx Hot Tubes transformer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 18, 2013 at 12:54 pm #83075
    seppol
    Member

    Hello,
    Mine Hot Tubes dont have original internal fransformer, because somebody is take it off. It work with extermal transformer (ac-ac 9,5volts) Wire goes to ac point on board, before diodes.

    Question:
    1. Its okay to use 9,5 volts or may be can used more?

    2. What are specs of original internal transformer? if i find somewhere similar?

    Regards,

    Seppo

    July 18, 2013 at 1:15 pm #119255
    The EH Man
    Moderator

    9.5v is fine.

    The internal transformer could likely be 12vct.

    July 18, 2013 at 2:31 pm #119256
    seppol
    Member
    Quote:
    9.5v is fine.

    The internal transformer could likely be 12vct.

    Lot of thanks!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.