Home › Forums › Help/Technical Questions › V256 receiving MIDI from Ableton with a terrible noise!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 4, 2011 at 11:50 pm #81588
    patokai
    Member

    hi! im having problems with my V256 when i am using it live, with MIDI trigger from Ableton Live to the V256.

    i am using besides the V256, a M-Audio Profire 610 and ableton live, so I secuence the MIDI notes that i will sing in a MIDI channel, and then send it with the profire in channel 16 (the v256 receives MIDI from that channel) to the V256, and the signal comes out from an Audio Channel from ableton live.

    So after a few minutes of using it, having a perfect tuning from the vocooder, it starts a horrible howling, terrible noise, that doesnt respects the signal sent by midi, making the mic work alltime.

    If you have a solution for that problem, please let me know. thanx!

    May 5, 2011 at 11:55 am #115138
    TheGhostMachina
    Member

    Do you have midi sustain on? CC64 I think.. That can cause the mic to work “all time”. Try automating the sustain down at the end of your clip in Live.

    TGM

    May 8, 2011 at 3:58 am #115155
    patokai
    Member
    Quote:
    Do you have midi sustain on? CC64 I think.. That can cause the mic to work “all time”. Try automating the sustain down at the end of your clip in Live.

    TGM

    thanxx i´ll do that

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.