Home › Forums › Help/Technical Questions › v256 Audio Connectivity Question

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 12, 2017 at 11:54 pm #84833
    paul.boos
    Member

    Hi everyone, I recently got a v256; I have a couple of questions as far as connectivity.

    So voice comes into the XLR input and the carrier signal comes in the Instrument In. My question deals with outputs. I’m planning to use this for 2 things: Vocoder and Reflex-Tune.

    I’m interested in the vocoder and how it plays with the outputs. If I went to a full wet signal, is the XLR output a full vocoder output?

    My input for the carrier signal will come from an AudioMatrix 16, allowing me to route almost any of my synths to be the carrier signal. I have no reason to also have the instrument coming out from the v256 unless it is the only way I can get the vocoder sound as I can simply route the synth for regular synth playing to a different AudioMatrix out.

    I am hoping that the XLR output suffices for the output for both vocoder modes and Reflex-Tune modes. Otherwise I am kind of eating up another input on my AudioMatrix.

    Thanks in advance for any help and advice!
    Paul

    March 15, 2017 at 1:44 pm #122689
    EHX STAFF
    Keymaster

    Very sorry to hear this.
    Please write the techs at:

    info@ehx.com

    9-5 M-F NYC time

    UK
    ElectroHarmonixUK@Virginmedia.com

    March 15, 2017 at 2:00 pm #122690
    Flick (EHX Staff)
    Moderator
    Quote:
    Hi everyone, I recently got a v256; I have a couple of questions as far as connectivity.

    So voice comes into the XLR input and the carrier signal comes in the Instrument In. My question deals with outputs. I’m planning to use this for 2 things: Vocoder and Reflex-Tune.

    I’m interested in the vocoder and how it plays with the outputs. If I went to a full wet signal, is the XLR output a full vocoder output?

    My input for the carrier signal will come from an AudioMatrix 16, allowing me to route almost any of my synths to be the carrier signal. I have no reason to also have the instrument coming out from the v256 unless it is the only way I can get the vocoder sound as I can simply route the synth for regular synth playing to a different AudioMatrix out.

    I am hoping that the XLR output suffices for the output for both vocoder modes and Reflex-Tune modes. Otherwise I am kind of eating up another input on my AudioMatrix.

    Thanks in advance for any help and advice!
    Paul

    It is pretty simple to set up the V256 the way you want it: just connect an XLR cable to the XLR EFFECTS OUTPUT and then turn the BLEND knob up all the way. The output of the XLR will be the vocoder/Reflex-Tune signal only with no dry vocal. The instrument signal is never routed to the XLR output.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.