Home › Forums › Help/Technical Questions › two 45000 loopers one foot controller

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 30, 2018 at 11:37 am #85304
    arsin
    Participant

    I’m looking for any resources that contain any information on integrating a second 45000 looper to a 45000 looper and 45000 pedal.

    Ideally I would like to control both loopers with a single pedal. I’m considering using an A/B pedal but first want to see if there is anything native and/or supported.

    April 30, 2018 at 1:45 pm #123861
    Flick (EHX Staff)
    Moderator
    Quote:
    I’m looking for any resources that contain any information on integrating a second 45000 looper to a 45000 looper and 45000 pedal.

    Ideally I would like to control both loopers with a single pedal. I’m considering using an A/B pedal but first want to see if there is anything native and/or supported.

    Here’s some basic setup info for synchronizing two 45000s:

    1. Call one 45000 the master and the second 45000 the slave.
    2. Connect MIDI Out from the master 45000 to MIDI IN on the slave 45000.
    3. Enable EXT. CLOCK mode on the slave 45000.
    4. Enable Quantize mode on both units so that the loop lengths are the same (or some multiple of each other). If the loop lengths differ, even though the tempo is locked between the units, the loops will sound like they are out of sync.

    Control of the Loopers:
    1. Probably the best approach for controlling the two loopers is to use a MIDI Foot Controller. The 45000 Foot Controller will be able to work for basic recording and playing but you won’t be able to advance the track count or change loop numbers on the slave unit.
    2. If you use a MIDI Foot Controller, set the master and slave 45000s to different MIDI channels.
    3. On your MIDI Foot Controller, set it up so that some buttons control the master 45000 and some control the slave 45000.

    May 2, 2018 at 4:57 am #123863
    arsin
    Participant
    Quote:
    Quote:
    I’m looking for any resources that contain any information on integrating a second 45000 looper to a 45000 looper and 45000 pedal.

    Ideally I would like to control both loopers with a single pedal. I’m considering using an A/B pedal but first want to see if there is anything native and/or supported.

    Here’s some basic setup info for synchronizing two 45000s:

    1. Call one 45000 the master and the second 45000 the slave.
    2. Connect MIDI Out from the master 45000 to MIDI IN on the slave 45000.
    3. Enable EXT. CLOCK mode on the slave 45000.
    4. Enable Quantize mode on both units so that the loop lengths are the same (or some multiple of each other). If the loop lengths differ, even though the tempo is locked between the units, the loops will sound like they are out of sync.

    Control of the Loopers:
    1. Probably the best approach for controlling the two loopers is to use a MIDI Foot Controller. The 45000 Foot Controller will be able to work for basic recording and playing but you won’t be able to advance the track count or change loop numbers on the slave unit.
    2. If you use a MIDI Foot Controller, set the master and slave 45000s to different MIDI channels.
    3. On your MIDI Foot Controller, set it up so that some buttons control the master 45000 and some control the slave 45000.

    This is perfect and thank you!

    April 25, 2019 at 1:14 pm #125147
    JewsHarpLooper
    Member

    Hi, did you successfully manage to do this? I want to do the same thing, so any advice / success stories would be greatly appreciated.

    I’m especially wondering if there’s a way toi display loop number!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.