- This topic has 1 reply, 2 voices, and was last updated 14 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › TheCloneTheory V1
I’ve acquired an old clone theory. The circuit board is labled MA7FR.
It hasn’t worked properly since I acquired it. Here is what was happening and what I’ve done.
When engaging the switch, a loud POP came through my amp (I figure a blown DC Coupling capacitor.)
So I bypassed the switch to aid in diagnosing.
Now I plug in and there is a huge difference in signal volume between running through the clone theory, and direct guitar into my amp.
I guess what I am looking for is an accurate schematic. I have a knowledge in electronics, but little practical experience, and as such would appreciate any help you can give in helping me diagnose this pedal.
Thank you in advance.
dcs
http://topopiccione.atspace.com/pjimages/EHCloneTheory_newnew.pdf
At the end of the pdf there is a schematic, but I don’t know if it has some mods or if it’s 100% original. But I think you’ll manage with it