The What Is The Current Draw For That EHX Pedal Thread

[KingofShticks]

Hi there. Please could you tell me the current draw for the stereo polyphase. I’ve literally trawled the entire internet including this forum and it seems like it’s the only pedal without any kind of info. I’m hoping to run it off the pp2+ from two 12v outputs at 60ma. Will these be sufficient? Your help would be greatly appreciated!

[Joerockamora]

Hello! Anybody know the current draw for the VoiceBox? Thanks!

[EHX STAFF]

200ma

[KingofShticks]

Hi, anyone able to tell me the current draw for the stereo polyphase xo? Cheers!

[EHX STAFF]

Its about 60mA

[zoooombiex]

Quote:

This is a much needed thread. I’ve taken all the info so far and compiled it into a spreadsheet for easier search and access. I’ll add to it as time permits and info becomes available.

https://spreadsheets.google.com/ccc?key=0Ak9R7oW8W8MidHhCOHdKSkFTdGowdklDd2sza2VXMFE&hl=en&authkey=CJXI1aEF

Thanks! Is it possible to add the link to this spreadsheet to the very first post?

Also, I’d like to know the draws for the Superego+ and the 16 second delay reissue (sorry if I missed them, but I didn’t see them in the thread or spreadsheet).

Thanks again!

[zmix]

Quote:

Quote:

Thanks for the speedy reply! Any luck with the actual milliamp requirement?

Nope

Resurrecting this thread..

I just made some measurements of 3 of my modern Electro Harmonix pedals when driven by a regulated, low impedance power source:

Deluxe Memory Man TT-1100 typical current draw: 160mA, though at minimum delay time I measured 190mA and at maximum delay time with all LEDs off (and pedal bypassed) I measured 140mA

Ravish Sitar (rev “F” PC board, metal washers on the jacks)actual current draw: 150mA consistently

Memory Toy actual current draw: 18.5mA at maximum delay time and 23.2mA at minimum delay time.

The analog delay units draw more current at shorter delay times due to the higher clock frequency.

[petiteviolon]

I just read through the spreadsheet and the Neo Clone has no data. Because no one has asked? Or because we don’t know?
Can we find out, please?

[EHX STAFF]

Please write the techs on Monday at info@ehx.com

[Flick (EHX Staff)]

The Neo Clone’s current draw is 12mA.

[petiteviolon]

Quote:

The Neo Clone’s current draw is 12mA.

Thank you.

[Dr.Lizardo]

Hello,

Does anyone know if the Canyon can be run with less than 150ma? I have a T-rex power supply that puts out 120ma per outlet?

Will running at this current cause problems/damage with the canyon? Thanks!

[Flick (EHX Staff)]

Quote:

Hello,

Does anyone know if the Canyon can be run with less than 150ma? I have a T-rex power supply that puts out 120ma per outlet?

Will running at this current cause problems/damage with the canyon? Thanks!

It’s best not to underpower the pedals. It may work fine in some rooms and then be problematic at other locations or times. We recommend you give the Canyon the full 150mA.

[Dr.Lizardo]

Perfect. Thanks for the reply.

[Batwing]

Hi. What’s the draw of The Worm (big box) please?

[Author]

Posts