Home Forums Help/Technical Questions Tap Tempo Switch Recommendation for Canyon Delay/Looper

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #84828
    johne1
    Member

    What tap tempo switch for Canyon pedal?

    Mono or stereo switch and cable?

    Please advise. Thanks!

    #123454
    cjvansickle
    Participant
    Quote:
    What tap tempo switch for Canyon pedal?

    Mono or stereo switch and cable?

    Please advise. Thanks!

    Bumping this. Need to know too.

    #123459
    gvelasco
    Participant

    There are lots of generic tap tempo switches available, but I am surprised that EH doesn’t make one. It will be a mono cable with a momentary switch. I like the Saturnworks utility switches and boxes. They look good. They’re made well, and they’re very reasonably priced. You can get them on Ebay, Reverb, etc.

    https://reverb.com/p/saturnworks-micro-tap-tempo?gclid=CjwKCAiAm7LSBRBBEiwAvL1-LzFP11Hnl-m6e2t4kcjtm3k0QHL5CjiVmM85l–cuyf7vbul2hp7MRoCWt0QAvD_BwE&hfid=455310

    #123460
    cjvansickle
    Participant
    Quote:
    There are lots of generic tap tempo switches available, but I am surprised that EH doesn’t make one. It will be a mono cable with a momentary switch. I like the Saturnworks utility switches and boxes. They look good. They’re made well, and they’re very reasonably priced. You can get them on Ebay, Reverb, etc.

    https://reverb.com/p/saturnworks-micro-tap-tempo?gclid=CjwKCAiAm7LSBRBBEiwAvL1-LzFP11Hnl-m6e2t4kcjtm3k0QHL5CjiVmM85l–cuyf7vbul2hp7MRoCWt0QAvD_BwE&hfid=455310

    Thanks for the reply. I’m leaning toward the MXR myself due to size restrictions. It has to fit under the Canyon and next to the Neo Clone.

    bi1Ja1g.jpg

    #123464
    EHX STAFF
    Keymaster

    If you are tight for space just use the canyon switch for tap tempo??

    #123465
    cjvansickle
    Participant
    Quote:
    If you are tight for space just use the canyon switch for tap tempo??

    I’m not that coordinated! I was activating tap tempo on the Canyon by accident every time I would engage the effect, so I disabled the internal switch.

    #123466
    EHX STAFF
    Keymaster

    I see! Any mini momentary mono switch will work

    #123495
    cjvansickle
    Participant

    Just installed the MXR Tap with an EBS flat patch cable. Works great with the Tap out of the box, no internal switching necessary.

    #124905
    kylemacabre
    Member

    Does the Super Pulsar and Grand Canyon both use the same protocol for external tap tempo. Is it NO or NC? I want to get a multi outputting tap tempo switch and have it controlling both.

    #124906
    kylemacabre
    Member

    Does the Super Pulsar and Grand Canyon use the same tap protocol? If so is it normally open or normally closed? I’ve seen a jack on the Super Pulsar for an external tap but I only see a foot switch jack on the Grand Canyon. I did read however in this thread that you can use an external foot switch on the GC, does it go in the Foot Switch port?

    Essentially I would like to have one tap tempo external foot switch with multiple outs controlling those two guys’ tempos simultaneously.

    #124911
    kylemacabre
    Member

    Does the Super Pulsar and Grand Canyon use the same tap protocol? If so is it normally open or normally closed? I’ve seen a jack on the Super Pulsar for an external tap but I only see a foot switch jack on the Grand Canyon. I did read however in this thread that you can use an external foot switch on the GC, does it go in the Foot Switch port?

    Essentially I would like to have one tap tempo external foot switch with multiple outs controlling those two guys’ tempos simultaneously.

    Also do you guys make skins for the Grand Canyon? It sticks out like a sore thumb on my pedalboard. I’m afraid people will start thinking I’m in a Christian Rock Band.

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.