Home › Forums › Tips, Tricks, Clips, and Pics › Synth 9 mod

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 30, 2019 at 12:26 pm #85987
    Mitch1868
    Member

    I have a Synth 9 pedal that I use quite frequently blending the guitar in and out during particular songs. I currently have a wing knob on the blend knob to allow me to blend on the fly. I was wondering there is a mod I could do to modify the blend circuit to hookup a external expression pedal to allow me to blend the guitar in and out with the synth 9. Thanks

    August 13, 2020 at 3:14 am #126348
    zoots
    Member
    Quote:
    I have a Synth 9 pedal that I use quite frequently blending the guitar in and out during particular songs. I currently have a wing knob on the blend knob to allow me to blend on the fly. I was wondering there is a mod I could do to modify the blend circuit to hookup a external expression pedal to allow me to blend the guitar in and out with the synth 9. Thanks

    You could replace the DRY volume or SYNTH volume knobs with an expression pedal but instead of modding the pedal, you could just send the different outputs to different amps or to a mixer and use a volume pedal on the DRY volume to make those blend adjustments.

    September 9, 2020 at 6:15 pm #126410
    DHMuffNStuff
    Member

    You “could” solder in a TRS input jack in place of the pot…
    An easier and not permanent way would be to have the wet (SYNTH) signal go out to a volume pedal then back to amp then have them rejoin using a Y cable or separate inputs in a pedal or the amp?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.