Home › Forums › Help/Technical Questions › Switchblade mods?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 5, 2010 at 2:23 am #80448
    TenSecondTed
    Member

    I was just about to order a ‘Switchblade Nano’ to change channels on my ac15c1 – when I saw THIS video!

    http://www.youtube.com/watch?v=_GJJny3r4Vc

    Is there any way to mod the Switchblade so that it can do the ‘A & B’ (channel blend thing) as well as the ‘A or B’ (channel select thing)?

    Thanks

    July 5, 2010 at 2:28 am #109973
    The EH Man
    Moderator

    Yeah, the original big box version would do that. I don’t know why the Nano version doesn’t.

    Here’s a schematic of the original version so you can figure it out.

    July 5, 2010 at 3:14 am #109974
    julian
    Moderator

    yeah, it’s as simple as using an extra switch. Beware though that it won’t work the other way around (using A/B as inputs instead of outputs) without further modification.

    July 5, 2010 at 6:22 am #109978
    TenSecondTed
    Member

    Thank you guys so much for the quick responses (and the schematic Ron)

    I only need it with one input to two outputs and not the other way round Julian, so I should be ok.

    There can’t be much inside the box (I assume) so there should be plenty of space for an extra switch? (maybe near the top?)

    I wonder if anyone has done this before?

    Thanks again gentlemen
    ;)

    July 5, 2010 at 5:37 pm #110000
    julian
    Moderator

    Well I’ve made a completely homebrew box that does this, as many others have done. I’m not sure if anyone’s ever done it specifically to the nano-switchblade.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.