Home › Forums › Help/Technical Questions › switch cap

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 18, 2009 at 5:32 pm #78440
    joeswagga
    Member

    The switch cap fell off my big muff. Any ideas of what to do, DIY or otherwise? Thanks for your help!

    June 18, 2009 at 5:53 pm #98077
    electro-melx
    Moderator

    switch cap?

    June 18, 2009 at 5:57 pm #98079
    joeswagga
    Member

    i didn’t really know what to call it, but i heard it referred to as a switch cap on another post. the tab on top of the switch that allows you to press the switch down. otherwise its just a cylinder sitting in the housing? i’m not sure if that makes much more sense.

    June 18, 2009 at 6:00 pm #98080
    The EH Man
    Moderator

    old Sovtek Big Muff? Epoxy it back on.

    June 18, 2009 at 6:03 pm #98081
    joeswagga
    Member

    right, yeah thats the one. unfortunately, though, it was lost while being moved around. do you know where i could get a replacement?

    June 18, 2009 at 6:06 pm #98082
    electro-melx
    Moderator

    ah, right…I’m with you now.

    the only place I’ve seen anything like that is here.

    http://www.banzaieffects.com/Pushbutton-Footswitches-c-246.html

    I don’t know if they would fit or are anything like what you have though, sorry.

    it might be easiest to just put a new footswitch in.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.