Home › Forums › Help/Technical Questions › Switcblade+ a+b

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 13, 2012 at 3:27 am #82177
    beruangberuang
    Participant

    I just bought a Switchblade+ , yesterday.I’m buying the pedal hoping that I could use simultaneously both channel..but I’ve tried so many times..still didn’t work…I’ve inserted A into out A n B into out B .. And Input jack to an amp..is it the right way patching the cables??or .. ?? could U explain me about how does it works because right now only A/B functional ..A+B button is functional but it didn’t work as it should do “both channel”

    February 20, 2012 at 8:30 pm #116973
    Mr. ORANGE
    Member

    I think it works only for a setup with one guitar and two amps or two channel amp with individual inputs (like VOX AC30). And input is definitely from a guitar or from effects placed before the switchblade…

    Hope that helps…

    February 21, 2012 at 2:15 pm #116980
    Cryabetes
    Participant

    ^^ that. Can you explain what you’re using it for?

    February 21, 2012 at 4:38 pm #116984
    TenSecondTed
    Member

    The INPUT jack is for your GUITAR, not Amp.

    OUT A and OUT B can then go anywhere you like:
    * Maybe to 2 separate amps (one clean, one dirty? – or both running in stereo?)
    * Maybe to both channels of a 2 channel amp (as MR ORANGE says) – I do this with my AC15
    * Maybe OUT A to some effects pedals or pedal board (and OUT B direct to amp) so the effects can then be switched on/off together by just hitting the switchblade.

    Lots of possibilities.

    As Cryabetes says, what do you want to use it for?

    February 21, 2012 at 8:25 pm #116985
    Cryabetes
    Participant

    If you’re trying to use it for, say, switching guitars, you should use a normal switchblade in reverse.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.