Home › Forums › Review Your EHX Gear › Superego

Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • Author
    Posts
  • August 30, 2014 at 8:08 pm #120198
    ehxvirus
    Member
    Quote:
    Hello All,

    I would think that using a compressor before the SE would work as well. I’ve used a Pigtronix Philosopher’s Tone before the SE & it seems to work well. I have tried a clean OD but it didn’t seem to be any different from a COMP.

    Same Problem. In front of superego I’ve put the POG-2 and before this was the philosophers tone. I’ve changed this. It was to noisy.
    But I love superego. SmallStone, NeoClone and a VolumePedal in send-return, sometimes the POG-2 (relay crazy), it works well in all3 modes. You have to learn the use and interaction of the potis. Never would give away. Next perhaps the Microsynth

    August 30, 2014 at 8:12 pm #120199
    ehxvirus
    Member
    Quote:
    ]hello guys,
    would like to know some informations about this cool effect… where it should be placed in the pedalboard?…at the moment my pedalboard is:
    TU2
    WAH
    SOUL PREACHER
    BASSBALLS
    SOULFOOD
    BIGMUFF
    WIGGLER
    SMALL STONE
    DELUXE ELECTRIC MISTRESS
    DELUXE MEMORY MAN
    STEREO MEMORY MAN HAZARAI
    HOLY GRAIL
    SUPEREGO
    DIGITECH JAMMAN LOOPER
    ..so is it correct?
    my opinion is that have a light delay when press n freeze the sound in the latch n momentary mode…

    After the drive and before delay/reverb. SamllStone and a flanger or NeoClone in the loop. Use of VolumePedal helps infront of returnSE helps.

    thx for reply
    stefano[/color]

    September 5, 2014 at 8:18 pm #120056
    Folkstone57
    Member

    Same Problem. In front of superego I’ve put the POG-2 and before this was the philosophers tone. I’ve changed this. It was to noisy.
    But I love superego. SmallStone, NeoClone and a VolumePedal in send-return, sometimes the POG-2 (relay crazy), it works well in all3 modes. You have to learn the use and interaction of the potis. Never would give away. Next perhaps the Microsynth
    [/quote]

    Sorry, but I’m confused as to what the problem is. Is the SuperEgo not picking up what you are playing or is something noisy ? If it’s a noise problem, your pedal must be defective because the one thing I’ve never had a problem with is noise with the SuperEgo. Even a noisy OD before the SuperEgo doesn’t make any difference because the OD isn’t coming through the pedal, it’s only providing a signal for the SuperEgo to do it’s thing. Now, noise may be coming through the DRY out. Otherwise, I’m not sure what is going on.

  • Author
    Posts
Viewing 3 posts - 16 through 18 (of 18 total)
1 2
  • You must be logged in to reply to this topic.