Home › Forums › Help/Technical Questions › Super Switcher

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 18, 2019 at 2:12 pm #86043
    catewart
    Participant

    I’ve been looking for a pedal switching solution for a while and the EHX Super Switcher seems to fit the bill, especially as it allows me to use the 4 cable method.

    One question I have is about controlling my amp. I have a Victory V30 MKii which has a footswitch to allow me to switch between channels and also apply ‘Crunch’ to channel 1. It’s a single footswitch with 2 buttons and a single jack connection to the amp?

    Is there a way to use the Super Switcher to get both controls working?

    Thanks
    C

    November 19, 2019 at 1:55 pm #125663
    EHX STAFF
    Keymaster

    Not familiar with that amp or the switching it system it uses. You are best to talk with the amp company. Here is the manual for the Superswitcher:

    https://www.ehx.com/assets/instructions/super-switcher.pdf

    CTRL 1 Footswitch:
    · The CTRL 1 footswitch can be used to switch amp channels, trigger remote effects etc.
    · CTRL 1 can be set normally open or closed.
    · CTRL 1 can be set to momentary or latching.
    · CTRL 1 can be set as a master bypass button.

    CTRL 2 Footswitch:
    · The CTRL 2 footswitch can be used to switch amp channels, trigger remote effects, etc.
    · CTRL 2 can be set to normally open or closed.
    · CTRL 2 can be set to momentary or latching.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.