Can anybody give me a quick run-down of how to run the SMMH in stereo mode? I have a 2 amp setup and that i can run my guitar into the mono L input and then run the 2 outputs to my 2 amps. My question is this, what exactly is the R input for? The only use that im aware of is running the L output to the R input (as described in the EHX tone tips section). Any help or typical setups would be greatly appreciated. Thanks.
when you use the mono/l input, the delays ping pong between amps. using the R input will send the same delay to both amps. this is a good feature as it allows you to ping pong any of the delay types. i usually use the mono/l input because it allows for a more complex stereo imaging.
hi there, wondered if i could drop my question in here. so in terms of the stereo output of the haz, does it output the same information in the “looper” mode to both outputs then (stupid question i know), or do i have to put a dummy plug in the second input? and if i wanted to output the same delay on both outputs , this dummy plug thing would work or would it need actual audio on the second input? thanks !
