Home › Forums › Help/Technical Questions › Stereo Memory Man eh7811b questions

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 19, 2010 at 9:06 pm #79723
    marcbolan
    Member

    Hi..I have a great old memory man (eh7811b) that worked great till my singer fell on it and broke off two of the pots with his guitar head!! My questions are:
    1. where can I get the pots for this pedal with the long legs that attach to the circuit board. I think the values for them are: 10k blend and 1k delay time. I don’t have a schematic, so if anyone can help I would REALLY appreciate it.

    2. the pedal still worked, and I could control the pots by using a small screwdriver and turning them. However, when I opened the back of the pedal, several of the wires that run from the echo-chorus switch to the board broke off. I could really use a high resolution photo of this area and I would be back in business!! I really appreciate any help here!!
    chris in denver

    January 19, 2010 at 10:46 pm #106606
    The EH Man
    Moderator

    To start with, you don’t need to replace the pots if they’re still working. All you need to do is replace the shafts. If you drop me an email with your address I’ll send you a couple.
    As for the switch, I don’t have any pics at the moment but if someone doesn’t jump in I’ll open mine and get one.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.