Home › Forums › Help/Technical Questions › Small Stone Version 4 Wiring help

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 25, 2010 at 3:11 pm #79934
    flñ¼genheimer
    Member

    Hello

    I recently bought a Small Stone version 4, but accedently ripped out all the wires, and can’t remember where they went on the PCB? Can someone post a pickture of the wires or explain where they go. I would also like to know if the Small stone version 4 is center positive or center negative?

    I really hope you can help me

    February 25, 2010 at 3:26 pm #107932
    The EH Man
    Moderator

    How do you accidentally rip out all the wires?

    February 25, 2010 at 4:09 pm #107934
    flñ¼genheimer
    Member
    Quote:
    How do you accidentally rip out all the wires?

    i was drilling a hole to fit a dc plug so i could use my normal power suply for the pedal, when the dril got stuck swinging the pedal around ripping all the wires off – It hurt like hell as I was holding the pedal in my hand. Stupid? Yes! and i’ve learned not to do that again.

    February 27, 2010 at 6:23 pm #108020
    flñ¼genheimer
    Member

    no help?

    March 6, 2010 at 8:24 pm #108240
    Vince
    Member

    I was just going to post the exact same request. I, too, tried to modify my beloved Small Stone so I could use a normal adapter, but at the time my experience and skill was lacking and the power wires are now disconnected and I don’t know where to put them.

    SO, if anyone has a Small Stone, could you please take a picture of the circuitboard and post it so that we can resurrect ours? It would be greatly appreciated.

    By the way, something that I find works great with the Small Stone is to use a rechargeable Energizer 9V-style battery. They are only 7.2 volts full charge, but the lower voltage changes the tone. No mess, just swap out a battery. I really miss the old Stone.

    March 6, 2010 at 9:12 pm #108242
    flñ¼genheimer
    Member
    Quote:
    I was just going to post the exact same request. I, too, tried to modify my beloved Small Stone so I could use a normal adapter, but at the time my experience and skill was lacking and the power wires are now disconnected and I don’t know where to put them.

    SO, if anyone has a Small Stone, could you please take a picture of the circuitboard and post it so that we can resurrect ours? It would be greatly appreciated.

    By the way, something that I find works great with the Small Stone is to use a rechargeable Energizer 9V-style battery. They are only 7.2 volts full charge, but the lower voltage changes the tone. No mess, just swap out a battery. I really miss the old Stone.

    I Figured it out on my own – I’ll make a pickture later in the week as i don’t have the time right now

    March 14, 2010 at 5:34 pm #108504
    Vince
    Member

    Have you taken a picture yet?

    March 15, 2010 at 5:45 am #108528
    flñ¼genheimer
    Member
    Quote:
    Have you taken a picture yet?

    http://i222.photobucket.com/albums/dd16/flugenheimer/wiring.jpg

    March 16, 2010 at 11:19 am #108564
    Vince
    Member

    Thank you.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.