Home › Forums › Help/Technical Questions › SMALL CLONE reissue volume drop / SCHEMATIC?

Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • Author
    Posts
  • November 15, 2014 at 12:23 am #120397
    sinesight
    Member

    So bad news… I installed a 100k trimpot and had no luck but the signal was still flowing through clean from the guitar. I then removed the trimpot and replaced it with a 10k resistor which I previously had in it. Now it was sending a clean signal but now it doesnt work. There is no phasing efffect. I also accidentally removed a power wire that was red so now I will try to fix that because now the pedal wont turn on. I major fail at my first attempt but I will keep trying.

    November 15, 2014 at 12:39 am #120398
    sinesight
    Member

    UPDATE: pedal still works after replacing the resistor but I think I messed up the eyelet but all is well except the led wont turn on because one red wire is detached. Im going to find where it goes and hopefully start fresh!

  • Author
    Posts
Viewing 2 posts - 16 through 17 (of 17 total)
1 2
  • You must be logged in to reply to this topic.