Home › Forums › Vintage EHX › Small Clone Help

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 22, 2014 at 3:56 pm #83408
    taylordude
    Member

    Hello, I’m new to the forum and wanted to see if I could solicit some help. I have purchased a used disassembled small clone, well not really disassembled but missing the 18 volt adapter input. it appears it was removed along with one input lead, the read lead on the 9volt and one output. All seem to route through the 18volt input. I have pictures, if someone could show me how to completely bypass the adapter and just wire in the 9volt that would be great. Cheers Taylor

    Heres a photo bucket link with labels..

    http://i1287.photobucket.com/albums/a621/kevinoffsite/2e07d58c-8cb1-4805-9ac9-110fa0c903ee_zpsd33383a7.jpg

    March 23, 2014 at 10:22 pm #119785
    taylordude
    Member

    Ok I figured it out, however I’m getting very weak modulation. The signal passes through to the amp but when the pedal is engaged I get a very generic sort of general chorus sound and the pot doesn’t change the signal. Any Ideas.

    March 25, 2014 at 1:44 pm #119791
    The EH Man
    Moderator

    Have you tried adjusting the bias trimpot?

    November 10, 2016 at 10:38 am #122236
    SamTheSlayer
    Member

    I am in the exact same boat, and would absolutely love to know how you fixed it. Do you have a diagram or some indepth photos?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.