Home › Forums › Help/Technical Questions › Smal Clone input soldering spot

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • December 20, 2009 at 6:36 pm #79558
    *Ivan*
    Member

    Hello every1.

    I have a problem with my Small Clone pedal.
    Today I opened up my pedal,and I saw mine blue cable from input jack got “unplugged”.

    Can any1 take a photo/link to a photo of Small Clone inside so I can find a place to solder wire back up.

    I think I got like 89-91 model of Small Clone EC-4600.

    Thnx

    December 21, 2009 at 2:29 am #105564
    SanquiFlerb
    Member

    If it got unplugged from input, just solder it back to the input jack, and if you don’t know where, just check the output wire and the out jack.

    December 21, 2009 at 9:27 am #105573
    *Ivan*
    Member

    Problem is,it’s unsoldered from board and still connected to input jack.

    December 26, 2009 at 9:28 pm #105726
    Dr.Eamer
    Member

    Hi, here is a pic of my Small Clone Pedal, hope it helps!

    I think it is the blue cable which goes from the input Jack to the center contact from my Pedals on off Switch, right?

    December 26, 2009 at 9:29 pm #105727
    *Ivan*
    Member

    Awsome,thank you very very much :)

    December 26, 2009 at 9:40 pm #105729
    Dr.Eamer
    Member

    No problem. does it work now?

    December 26, 2009 at 10:00 pm #105730
    *Ivan*
    Member

    I will try it first thing in the morning.

    I see u got true bypass switch,will do that too ;)

    December 26, 2009 at 10:26 pm #105732
    Dr.Eamer
    Member

    Ok, Good luck with it!

    Hmm, how can you see that mine is true bypass,(because of the sort of switch which is built in,maybe)???

    December 27, 2009 at 1:54 am #105737
    *Ivan*
    Member

    Yes you have 3dpt switch which indicates you have true bypass.

    December 27, 2009 at 8:46 pm #105748
    SanquiFlerb
    Member

    Well, actually having a 3pdt doesn’t mean it is tb, but it’s known that new sc are tb

    December 27, 2009 at 8:57 pm #105749
    *Ivan*
    Member
    Quote:
    Well, actually having a 3pdt doesn’t mean it is tb, but it’s known that new sc are tb

    My bad then.

    Anyway,pedal works now,tyvm for help guys.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.