Home › Forums › Help/Technical Questions › separate outputs for the electro-harmonix 22500?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 29, 2021 at 9:52 pm #184290
    TMac
    Participant

    I have had the electro-harmonix 22500 for several years now and it has been just sitting there as I worked on other projects. I have decided to finally figure out how to use this unit so I am slowly digging into the manual. I was experimenting with the rhythm loops but it never even occurred to me that when I go into an amp with a signal, if I overdrive the amp, of course, everything will be overdriven including the rhythm loop. I know the unit has stereo capability but does having two output channels allow for the rhythm signal to exit through one and a guitar etc. exit through the other?

    July 30, 2021 at 8:50 am #184323
    EHX STAFF
    Keymaster

    TMac Does your amp have an effects loop?
    Or are you cracking the amp for power amp distortion?

    July 30, 2021 at 7:22 pm #184454
    TMac
    Participant

    Actually, mainly for ease instead of having to drag out an amp, I’m going into a Strymon Iridium amp pedal and I am overdriving it BUT I do have an overdrive pedal I will be relying on more than overdriving an amp. I will eventually be mainly using an AER 60/4 acoustic amp that will be clean and it does look like it has a send and return in the back of it for effect loop capability.

    • This reply was modified 3 years, 4 months ago by TMac.
    July 31, 2021 at 10:28 am #184457
    EHX STAFF
    Keymaster

    Well if your using a amp simulator put the looper after it and you will be fine.
    In other words anything that distorts put before the looper so the looper has a clean path out.

    August 1, 2021 at 7:04 am #184470
    TMac
    Participant

    The only thing is that I was using a small set of headphones in the Iridium to hear things, BUT that’s okay, I’m eventually going to be using my clean acoustic amp and that will be fine.

    I noticed on some other forums there is a firmware update to enable easier loop erasure, I’ll download that at some point. I’m looking forward to getting a handle on this unit, there are so many possibilities that I can already envision.

    Thank you, and I know where this forum is now if I have more questions!

    August 1, 2021 at 9:18 am #184472
    EHX STAFF
    Keymaster

    Tmac Yes the new firmware is great! Download it here:
    https://www.ehx.com/products/22500/

    Its right under the specs section.
    Any trouble please write the techs at info@ehx.com

    Have fun!

    • This reply was modified 3 years, 4 months ago by EHX STAFF.
    August 1, 2021 at 8:01 pm #184477
    TMac
    Participant

    Update went smoothly, full steam ahead!

    Thanks again!

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.