Home › Forums › Help/Technical Questions › Schematic for Clone Theory Original required eh-cl3000

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 23, 2009 at 10:43 pm #77794
    surfsnowboy
    Member

    Help anybody? Need a new toggle switch for my vintage clone theory, thanks in advance…

    February 23, 2009 at 10:46 pm #93876
    Ned Flanders
    Moderator

    You shouldn’t need a schematic for that, just post some photo’s of the old switch for us.

    February 23, 2009 at 10:54 pm #93877
    The EH Man
    Moderator

    Also, it’s not a toggle switch. It’s a slide switch.
    If it’s an Edge switch, you need an SPDT. If it’s Chor-Vib/Vib-Flange you’ll need a DPDT. The holes are tapped for 4-40 screws although you can use an untapped one and add 4-40 nuts to the screws.

    February 23, 2009 at 11:33 pm #93881
    surfsnowboy
    Member

    Thanks for the fast response peeps, really appreciated. So, the picture isn’t too clear but it reads
    3.0A 125V AC
    1.5A 250V AC
    0.5A 125V DC

    Thanks

    February 23, 2009 at 11:34 pm #93882
    surfsnowboy
    Member

    Also, the read-out on the box for the switch reads exactly chor/vib-vib/flange

    February 23, 2009 at 11:50 pm #93883
    Ned Flanders
    Moderator

    You need this switch here: http://www.smallbearelec.com/Detail.bok?no=37

    February 23, 2009 at 11:59 pm #93884
    The EH Man
    Moderator
    Quote:
    Thanks for the fast response peeps, really appreciated. So, the picture isn’t too clear but it reads
    3.0A 125V AC
    1.5A 250V AC
    0.5A 125V DC

    Thanks

    You’ve got one of the odd long ones. I have some very similar ones here. Are you sure the switch needs replaced? Most of the time they’re just starting to come apart and can be snapped back together. What’s the problem you’re having?

    BTW, the one Ned Flanders posted a link to will work fine. With the shorter handle there’s less chance of it being bumped and broken.

    February 24, 2009 at 12:21 am #93885
    surfsnowboy
    Member

    cool. The old switch has no contact and spring inside, probably fell out from due to wear. So there’s no switch over whatsoever. I’ll get the one Ned suggested, awesome! I’ll let you know how it all goes….

    February 24, 2009 at 3:11 pm #93899
    surfsnowboy
    Member

    Well the pedal works a treat thanks to both your help! Great job and all the best!

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.