Ring Thing : Step by Step instructions for whammy? – Electro-Harmonix

This topic has 2 replies, 2 voices, and was last updated 13 years, 2 months ago by vorvick2.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
October 10, 2011 at 10:35 pm #81917

vorvick2
Member

I went to a local store, hooked up the ring thing with an M-Audio expression pedal, carefully went through the manual, tuned it to an octave with the toe down, but it would only drop a 6th when I went to heel down. (used both settings on the M-audio)

Any help would be appreciated,

V

October 14, 2011 at 3:36 pm #116144

Flick (EHX Staff)
Moderator

What was the setting of the grey knob on the side of the M-Audio pedal? It needs to be set to the narrowest portion of the swoop symbol on the knob in order to get the full range out of the expression pedal. Basically you have to turn the grey knob all the way down.

Also make sure the switch on the bottom is set to “M-AUDIO”.

This is true for all our pedals that have expression inputs.

October 14, 2011 at 3:40 pm #116147

vorvick2
Member

Thanks – I tried it with a moog pedal and worked fine. Probably user error on my end.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.