Question about Bassballs and PSU – Electro-Harmonix

This topic has 2 replies, 2 voices, and was last updated 13 years ago by HeavyMetaller.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
December 20, 2011 at 9:00 am #82053

HeavyMetaller
Member

Hello all! i’m new and i’m come from Italy, i’ve recently bught a Nano BassBalls, i’ve tried to power up with an Proel 9V 700 mA DC PSU but the pedal not work! It only work with battery… is possible that my bassballs is not work because it need an 9.6 volts psu and not a 9v psu?

December 20, 2011 at 4:30 pm #116561

Mr.Grim
Member

as long as your PSU is also “center negative” it should work just fine.

otherwise there may be sum thing wrong with that unit.

December 20, 2011 at 4:39 pm #116562

HeavyMetaller
Member

yes my psu is center negative, 2.1 mm 9 v DC. i’ve tried with other 2 universal psu and is not work… but if there is the baattery on, and if i plug the psu jack, the bassballs auto turn off.. so i think that the pedal recieve energy by the psu but i do not know why is not work…
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.