- This topic has 1 reply, 2 voices, and was last updated 5 years, 9 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Vintage EHX › Problem with a vintage Bass Micro Synthesizer
Hey guys,
I have a problem with my vintage Bass Micro Synthesizer.
As soon as I turn on the pedal, it does not emit any sound. Bypass works properly.
Without doing anything and simply continuing to play, after a while, the pedal starts working.
After the pedal has started to work, I no longer have problems. Problems reoccur only when turned off and on again.
It seems like the pedal needs to warm up before it starts working.
It’s powered by the original 24v power supply.
Any suggestions to understand what could be the fault?
Thank you very much for the support
Paul
I have a vintage Micro Synthesizer and a vintage Bass Micro Synthesizer and they both need 10-20 seconds to warm up after I turn the power switch on. After that, they both work fine when turning the effect on and off with the footswitch. I had another vintage Micro Synthesizer and it was the same way too, so I’m guess that maybe they are all like this.