- This topic has 5 replies, 3 voices, and was last updated 13 years, 5 months ago by .
Viewing 6 posts - 1 through 6 (of 6 total)
Viewing 6 posts - 1 through 6 (of 6 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › PROBLEM CONNECTING GUITAR AND MIC TO VOCODER V256
Hello!
I already read the instructions and it says that in VOX-ROBO Mode I can get my voice modulates the guitar plugged in the inst. input. I moved the PITCH KNOB fully CCW but it doesn’t work… if it’s not fully CCW or CW the voice will get a single pedal note that doesn’t change… so I don’t know why is not working.
When the MIC BYPASS LED is off, the guitar and the mic sound dry.
HELP… pleaseee
Does it just happen in the one mode? Or can you not vocode with an instrument in any mode?
TGM
Nothing happens when I connect the guitar or a synthesizer (the carrier instrument) in any of the 3 VOX ROBO MODES and the INSTRUMENT CTRL MODE the voice only glides from the last note I sang… it doesn’t affect if I play the instrument or if I don’t.
I just received it yesterday and I don’t know if it has to be setted in any way.
When you set the blend, have you made sure to hold down the ‘Mic Bypass’? Factory default is 100% dry (Blend CCW). Noon is 50/50, and CW is 100% wet. Hope that helps.
TGM
But moving the BLEND knob holding down the MIC BYPASS only affects the INST OUTPUT mix, it doesn’t help me with my problem… the last thing I want to think is that is something wrong with the pedal… but I’m not sure yet.
Write info@ehx.com.
They will help you.