- This topic has 3 replies, 2 voices, and was last updated 14 years, 2 months ago by .
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Precise questions about the “Stereo Memory Man with Hazarai”…
Hello,
Although I’ve bought my first EHX FX’s 30 years ago, it’s my first post here…
I’m about to buy a “Stereo Memory Man with Hazarai” but I need to know a couple of things:
-Is the looper fully stereo? I mean: if, while I record a loop, I inject a sound in the left input THEN in the right one, will the recorded loop be stereo as well? If it’s the case, does it reduce the loop time to 15 seconds?
-Does the SMMWH cooperate with amp FX loops? I generally use an EbTech Line Level Shifter to convert the signal (from line to guitar level and conversely) but with some FX’s it’s noisy and even passed through the LLS, the preamp signal is still “hot”… Is the SMMWH “touchy” with hot levels?
Thx a lot for any documented answer!
-Is the looper fully stereo? I mean: if, while I record a loop, I inject a sound in the left input THEN in the right one, will the recorded loop be stereo as well? If it’s the case, does it reduce the loop time to 15 seconds?
It’s stereo but you can’t record the left and right channels at different times, you can however record in stereo and play back in stereo.
Thank you!
I’ll be grateful if someone explains how the SMMWH behaves in the FX loop of a typical guitar amp.
I’ll be grateful if someone explains how the SMMWH behaves in the FX loop of a typical guitar amp.
I’ve not done it myself, but I know people have mentioned online they do run them in amps FX loops without any problems, so I’d presume it works fine.