Powering Freeze pedal… – Electro-Harmonix

This topic has 4 replies, 3 voices, and was last updated 13 years, 8 months ago by andersbror.

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
March 2, 2011 at 1:08 am #81417

andersbror
Participant

So I just got a Freeze pedal without the adapter and was wondering if a DC Brick is Ok to use.
Thanks!

March 2, 2011 at 1:10 am #114530

The EH Man
Moderator

The Freeze requires about 140mA of current so as long as it gets that from the DC Brick (at 9v) you should be OK.

March 2, 2011 at 2:02 am #114531

andersbror
Participant

Thanks for the quick reply and the links!

March 9, 2011 at 10:08 am #114591

musicngn1
Member

Quote:

So I just got a Freeze pedal without the adapter and was wondering if a DC Brick is Ok to use.
Thanks!

Hi, the DC Brick is not OK for the Freeze pedal, I have both ones and if u connect the pedal to this power supply makes some noise, try to power it with a separately adapter or find another multi-power supply.

JL

March 10, 2011 at 11:46 pm #114617

andersbror
Participant

Quote:

Quote:

So I just got a Freeze pedal without the adapter and was wondering if a DC Brick is Ok to use.
Thanks!

Hi, the DC Brick is not OK for the Freeze pedal, I have both ones and if u connect the pedal to this power supply makes some noise, try to power it with a separately adapter or find another multi-power supply.

JL

Thanks for the heads up!…I went and got the proper adapter for the Freeze.
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.