Hello, I’m trying to find the solution to power up a good vibes from a PP2+ . The pedal would have all lights on, but the effect won’t work. I have connected it to one of the 250mA outputs, but it’s the same. Can it be that is not getting enough voltage from the PP2+? When i plug it to the adapter that comes with the pedal it works fine. So i assume i should increase the voltage from the PP2+ by 0.6 volts?
I thought about using a voltage doubler and connect it to the sag controlled outputs, and bring the power down to about 9.6 or 9.8 v using the sag pots. Is this possible?

Thanks 👍