Home › Forums › Help/Technical Questions › Power Supplies

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • September 25, 2016 at 4:27 am #84596
    pennyroyaltea94
    Member

    Hi guys so I bought one of theses.

    cuoipy8gdyu4g7hzycjy.jpg

    As you see it says 9.6 and for IBANEZ BOSS.

    Before I was using a GENERIC 9V. Seemed kind of buzzy and also the TONE volume seemed low

    You mean to tell me that 0.6 can make that much of a difference ?

    September 26, 2016 at 2:15 pm #122080
    EHX STAFF
    Keymaster

    NO
    9.6 is what a new battery will measure.
    You should hear no difference between 9 and 9.6 volts.

    September 26, 2016 at 4:21 pm #122083
    pennyroyaltea94
    Member

    Unless the original adapter connection I had was truely that crappy :)

    September 26, 2016 at 9:57 pm #122084
    pennyroyaltea94
    Member

    Hey I got it in and exactly it’s this one

    EHX BRAND

    US96DC200BI.png

    The plug I had before had a long shaft so alot of the silver tube was visble , lack of connection maybe. I will find out tonight when I start playing it

    October 7, 2016 at 1:30 pm #122112
    roseauinflexible
    Member

    Hello everybody.
    I am a happy new owner of a 22500 looper.
    I just wanna be sure if I can use my Carl Martin Pro Power 9V DC as a power supplie for the 22500…

    Thanks a lot for the answer !

    And sorry for my bad English ….

    October 8, 2016 at 12:48 am #122113
    EHX STAFF
    Keymaster

    Your English is great!
    Sorry no idea about your supply.
    Just make sure it matches the spec of the supply that came with the 22500.
    9.6VDC/500mA

    WARNING:
    Your
    22500 comes equipped with an Electro-Harmonix
    9.6VDC-500mA power supply. The 22500 requires 240mA at 9VD
    C with a center negative
    plug and does not accept batteries. Using the wrong
    adapter may damage your unit and void the warranty. Please do not exceed
    10.5VDC on the power plug.

    October 8, 2016 at 4:56 am #122114
    roseauinflexible
    Member

    Hello Administrator.
    Thank you very much for the answer.
    The Center is negative ; 9V ; DC
    So it should not damage the looper …

    I will try : fingercrossed:-S

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.