- This topic has 1,060 replies, 268 voices, and was last updated 5 years, 4 months ago by .
-
This thread needs more pedalboards.
Just bought a Knockout! (working on getting a Micro Pog!) I’ll post picks when all is said and done.
Here is the latest version of mine. I am looking at picking up a Nano Holy Grail but I am waiting on more info on the Cathedral. I used to own a Double Muff and a Holy Stain. I miss my Holy Stain quite a bit. I will have to get that one again.
Ah what to do…… :doh:
Just picked up the Furman today after NEVER having a pedal board. I run a stereo setup – using the two LS-2s as a small mixer essentially.
You can hear some sounds I make Here.
It’s all live – one dude, guitar, mic, voice, small percussion, pedals – no overdubs – just a lot of layering and a big stereo PA.
PS – that’s a PS3, RV3, (and yes…that IS a..) Stereo Memory Man w/ H, Green Sov Muff and Stone below….
Not pictured: Holy Grail (original one), French Toast, 3 PDS delays, Mod FX units ah a bunch of other crap I have around for fun…
The only things I’m torn on is keep the DD-20 on there? Or.. put the DMM on?
Also need to check out the Bassballs for filtering at some point, although I think the envelope will kill my want/need for it). AND some sort of sequenced tremolo effect like that of a ZVEX seek-Trem or the Boss Slicer (slicers not happening, although the midi sync to the 2880 is mighty tempting…
The DMM is not that important for Live stuff so it can stay off… The 2880 foot controller I’m going to keep off there so I can use it on the floor if I decide to put the board on a table some time. I NEED to fit some distortion on here, and I really prefer my Muff – maybe I’ll have to check out the newer XO muffs… I had a LBM – sold it as I thought the range was a little flimsy.
Open to ideas.
Pitchblack Tuner -> EHX Bass Microsynth -> Voodoo Labs Superfuzz (controlled by DeVolt voltage reducer) -> Ampeg Scrambler Clone -> BYOC Ross Compressor Clone -> EHX Steel Leather -> EHX Polychorus -> EHX Holiest Grail
I’m almost half-out of room!
I just finished my Ikea Gorm pedalboard. Pretty nifty, and it only cost about $35. Most of the cost is from the velcro. I don’t know why the stuff is so expensive ($20 for 8 feet). My big-box Pulsar should be arriving on Monday. Try to lay of the Jack White’d.
My wah and the other half of my Big Muff are cut off.
- You must be logged in to reply to this topic.
