Home › Forums › Help/Technical Questions › Pedal Order

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 26, 2009 at 11:13 am #79390
    AshjaahsMuff
    Participant

    im getting some new pedals today and i wondered if you guys could help and let me know where to put them in my chain

    the pedals are

    micro pog
    white finger
    big muff tone wicker
    dr q

    the chain i currrently use is

    guitar
    tu2
    ns2 input
    ns2 send
    boss od3
    english muff’n
    mxr micro amp
    stereo electric mistress
    ns2 return
    ns2 output
    DMM
    amp

    effects loop
    holy grail

    i will be taking the boss od3 off the board i think so if you could suggest ways without the boss od3 that would be greatly appriciated

    thanks again

    November 26, 2009 at 1:10 pm #104280
    BlueSteel
    Participant

    well i don’t know about the micro pog and white finger, but i’d put the dr q after the ns2 and the big muff after the english muffn. i hope that helps a little.

    November 26, 2009 at 2:49 pm #104284
    Kevin Demuth
    Member

    i’d probably put the Dr Q and White Finger right before the Boss OD-3, and the Big Muff and Micro Pog between the English Muff’n and Micro Amp.

    November 26, 2009 at 7:34 pm #104294
    DarkAxel
    Participant

    i’d keep the Dr.Q and White finger as close to the guitar as possible (i own/owned both of them)

    and i’d put the muff after Boss OD3… i have a russian big muff and the sound with the TS-808-like OD before it is godlike (HEAVY)

    about the micro pog… i’m not sure… i haven’t tried it yeat so i don’t know how the sound differs before/after anything… but at first i’d probably put it right after compressor to have the clearest tracking possible

    November 26, 2009 at 8:34 pm #104296
    AshjaahsMuff
    Participant

    thanks everyone for your replys

    im now going to get the effects tomorrow

    the way i shall do it is

    guitar
    tu2
    ns2 in
    ns2 send
    white finger
    dr q
    boss od3
    micro pog
    big muff
    english muff
    mxr micro amp
    stereo electric mistress
    ns2 return
    ns2 out
    dmm

    effects loop
    holy grail

    what do you think ?

    November 26, 2009 at 8:50 pm #104297
    Kevin Demuth
    Member

    yeah, give it a try :thumb:

    although, the Dr Q reacts to your playing dynamics so that’s why i suggested putting it after the compressor.

    the Micro Pog, in my experience can be used pre- or post-dirt; it still tracks perfectly after heavy fuzz but i found that with some Micro Pog settings, that if you run it into a fuzz/distortion it may get a bit muddy.

    it’s all a matter of personal preference though.

    November 26, 2009 at 11:09 pm #104302
    DarkAxel
    Participant
    Quote:
    it’s all a matter of personal preference though.

    yeah, exactly

    but also – try the Dr.Q after White finger – as said…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.