Home › Forums › Help/Technical Questions › Parallel 9v 100mA Supplies for Micro POG

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 29, 2009 at 2:18 am #77622
    harrij4
    Member

    I just picked up a pedalboard with the typical 9V 100mA power supply block and would like to use it to power my Micro POG. I know the MP is supposed to be 9.6V, but for Class 1 DC power supplies, the 600mV difference is within manufacturing variability. The big problem is the 100mA per outlet limit. I’ve only got 6 pedals (including the MP) so my plan is to wire two of the 100mA 9V DC supplies in parallel to give me a 9V supply tap with a total of 200mA available current.

    Any thoughts?

    January 29, 2009 at 2:26 am #92194
    julian
    Moderator

    What power supply?

    The 5 and 6 outlets on the Voodoo Labs Pedal Power 2+ has 250 ma and can thus power the EHX digital 9v pedals very well.

    January 29, 2009 at 2:29 am #92195
    harrij4
    Member

    The power section of a SKB PS-45 pedalboard. It’s got 8 9V 100mA supplies. I’ve got some spares so I’d like to use two of them in parallel to get the 200mA required by the MP

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.