overdubbing on 2880 / feedback control on faders – Electro-Harmonix

This topic has 1 reply, 2 voices, and was last updated 15 years, 6 months ago by diblet.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 27, 2009 at 6:35 am #78139

looptheloop
Member

hello forum people. have a 2880 which i bought recently and am confused with the faders and how they can either be volume controls or act as feedback controls like a delay. i have read the manual and it states that in overdub mode the faders act as feedback controls but even then when i raise them they seem to make the track louder in exactly the same way as when im playing back? what am i doing wrong?

May 2, 2009 at 5:53 pm #96270

diblet
Member

overdubbing:

if you have the slider set to 100% you get no attenuation — the loop remains at the same level as before after each overdub

if you have the slider set to 50% — only 50% of the level of the previously recorded loop will remain after the overdub

when you are not overdubbing, just playing back the loop(s):

the volume sliders act as simple volume for each track

hope this helps? /d
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.