Home › Forums › Help/Technical Questions › Ocean’s 11 no infinite reverb & mode button not functioning

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 3, 2019 at 10:02 am #85723
    KEESEEK
    Member

    Greetings,

    I bought my Ocean’s Eleven a little over a half a year ago, and a couple of days ago I found out that the pedal’s infinite reverb stopped functioning. When I press and hold the footswitch, the pedal just turns off, and on top of that, the tank “kick” on spring mode does not seem to function as well. As well as all that, the mode switch also stopped doing anything for no reason whatsoever, although I can hold it down and do the settings on the current mode. I tried switching on and off the “tails” dipswitch inside the pedal, but that did not help.

    The pedal was mainly used on practices, and it gigged only on a small number of occasions. Any advice?

    June 3, 2019 at 10:11 pm #125271
    EHX STAFF
    Keymaster

    What power supply are you using?

    June 4, 2019 at 3:32 am #125277
    KEESEEK
    Member

    I used the original EHX power supply that came with the pedal

    June 4, 2019 at 3:31 pm #125279
    EHX STAFF
    Keymaster

    Try this please

    USING INFINITE REVERB
    1. Decide which footswitch to use for controlling this feature. You can use either the internal footswitch or an external footswitch connected to the INFINITE jack. Plugging in an external footswitch, however, always disables the internal footswitch’s infinite reverb functionality.
    2. If using the internal footswitch, ensure that the internal “TAILS” switch is ON; infinite reverb is inaccessible when this switch is OFF. If using the external footswitch, however, infinite reverb can be engaged regardless of whether TAILS is on or off.
    3. Press and hold down the footswitch for more than 350 milliseconds. The LED will quickly cycle green, red, then orange to indicate that infinite reverb is engaged.
    4. To exit infinite reverb, release the footswitch. The pedal will return to the state it was in before engaging infinite reverb.

    Manual here
    https://www.ehx.com/assets/instructions/oceans-11.pdf

    If your still having the issue please contact the service techs at:
    info@ehx.com

    June 4, 2019 at 3:35 pm #125280
    EHX STAFF
    Keymaster

    Also a few modes do not have in INV function ,like spring and auto inf and a few Dyn modes.

    June 4, 2019 at 6:46 pm #125289
    KEESEEK
    Member

    Well, I guess it’s going to be the service techs. Shame it’s nothing I can do. Thank you anyway.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.