Home › Forums › Help/Technical Questions › NY2A Question

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 5, 2009 at 4:21 am #78353
    dsstudio
    Member

    Hello!
    I am new here but not new to EHX products :)
    I have an NY2A (love it BTW) and I think I am having problem with it.
    Unit currently will not pass any audio until I switch it into Bypass mode …
    So, Is it broken? If So, Where can I send for repair and how much will it cost… I bought it about 1.5 year ago.
    Thanks
    Sonny
    PS: EHX staffs may email me in provate.

    June 5, 2009 at 7:51 pm #97403
    The EH Man
    Moderator

    https://www.ehx.com/forums/viewthread/1134/

    Try new tubes in it 1st if you can.

    June 6, 2009 at 3:17 am #97433
    dsstudio
    Member

    Hi
    Thanks for the response.
    Can you tell me more about changing Tubes? what kind and where to buy?
    Both Channels behave the same (No sound until Bypass) so in that case, Both tubes are death due to the extreme heat?
    Also, The link you post, what’s the meaning of it? Are you suggest the email so I can contact?
    Thanks
    Sonny

    June 6, 2009 at 10:00 am #97436
    The EH Man
    Moderator
    Quote:
    Hi
    Thanks for the response.
    Can you tell me more about changing Tubes? what kind and where to buy?
    Both Channels behave the same (No sound until Bypass) so in that case, Both tubes are death due to the extreme heat?
    Also, The link you post, what’s the meaning of it? Are you suggest the email so I can contact?
    Thanks
    Sonny

    If there’s a bad tube, no signal will go through. I don’t have a schematic so I don’t know what tubes are used.
    The link is to contact EH for repair.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.