Home › Forums › Help/Technical Questions › no output from iron lung

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • April 1, 2010 at 2:32 pm #80120
    xst035
    Member

    it’s not working. with the pedal off, the guitar would sound, turned on, no guitar sound and no vocoding effect. plug the mic to a PA system worked fine

    April 1, 2010 at 2:39 pm #108960
    The EH Man
    Moderator

    Do the leds come on?

    April 1, 2010 at 2:50 pm #108961
    xst035
    Member

    LED is OK.. I just received this today

    April 1, 2010 at 2:58 pm #108962
    The EH Man
    Moderator

    So, it lights up but there’s no sound. You have both a guitar and mic plugged into it and the output patched to an amplifier?

    Sounds like it’s got problems. Either return it to the dealer or send it to EH for warranty repair.

    April 1, 2010 at 3:04 pm #108963
    xst035
    Member

    too bad i’m not in the US,it says the warranty card should be mailed within 10 days from purchase, just got it from ebay as bnew, i even purchased several more units.

    April 1, 2010 at 3:45 pm #108964
    Paco (EHX staff)
    Member

    when the iron lung is on, are you testing the the guitar, and the microphone separately? if so, try singing and playing the guitar at the same time.

    April 1, 2010 at 4:12 pm #108965
    xst035
    Member

    Yup. That’s what I’m exactly doing. I do have the voicebox annd it works just fine.

    April 1, 2010 at 4:15 pm #108966
    Paco (EHX staff)
    Member

    does the mic require phantom power?

    April 1, 2010 at 4:37 pm #108967
    xst035
    Member

    I’m using dynamic mics

    April 7, 2010 at 12:37 pm #109087
    xst035
    Member

    ribbonwires are not connected where they should be, got it soldered, fixed! :)

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.