Home › Forums › EHX News › New EHX C9 Organ Machine

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • December 2, 2014 at 11:18 pm #82568
    bill ruppert
    Participant

    New EHX C9 Organ Machine

    March 11, 2015 at 12:21 am #120587
    guitslinger
    Member

    I have had my B-9 pedal for a few months now and I have it permanently hooked up in my effects chain and use it every time that I pick up a guitar.The other day I found out about the C-9 pedal and I was gobsmacked once again by an EHX pedal.When I saw the demo on Youtube I knew that I had to have one,especially after hearing what the B-9 and C-9 sounded like played through 2 different amps with a touch of delay.My local music store didn’t have any in stock but I asked them to order one in for me right away.I didn’t think for a minute that EHX could ever come up with another pedal that could come close to the B-9 for amazingly cool and innovative sounds,but I should have know from past experience to never underestimate the creative genius of Mike Matthews.Until I get my C-9,I’ll be like a kid waiting for Christmas.

    December 6, 2015 at 6:03 am #121059
    M. R. Ogle
    Member

    I agree. As I stated in another thread, the B9 and C9 demo videos were so astounding, I immediately hoped there was an S9 (for Strings) in the works.

    Love Electro-Harmonix stuff, have owned EH products for years and years. All the way back to plugging my little LPB-1 right into the front of my Fender blackface amp in the 1970’s!

    December 6, 2015 at 7:54 pm #121060
    mojine
    Member

    Can you run the C9 on batteries? Even if short lived

    December 7, 2015 at 4:00 pm #121062
    EHX STAFF
    Keymaster

    Your best to get a rechargeable 9 volt battery pack to run it.

    quote author=”mojine” date=”1449431651″]Can you run the C9 on batteries? Even if short lived[/quote]

    December 7, 2015 at 6:59 pm #121071
    mojine
    Member

    Does it have a battery compartment and an internal connection for battery?

    December 7, 2015 at 8:56 pm #121073
    EHX STAFF
    Keymaster

    No it needs the EHX supply which is included with the pedal.

    December 7, 2015 at 9:03 pm #121074
    mojine
    Member

    thx

    February 16, 2016 at 1:30 am #121268
    Honkin_Goose
    Participant

    Hi! I’m very happy with my C9 but it’s a pain to carry it with its own 9,6V power supply in my pedalboard. I have a nice Vinteck power supply with eleven 9V isolated outputs of 350mA or 450mA and it would be perfect to use one of them to feed the C9. Would it work despite the 0,6 V of difference?

    February 24, 2016 at 2:44 am #121295
    EHX STAFF
    Keymaster

    Try it and see!
    Some multi power supplies and not isolated between outputs and cause weird ground loop humming and buzzing.
    If it works great, if not use the supply we packed with the pedal.

    February 20, 2019 at 9:56 pm #124861
    BobC
    Participant

    I run my Mel9 with a Pig Hog 1Spot style power supply (the original; not the brick type. It works fine. I think the draw on that pedal is about 100mA. I’d imagine the C9 specs are similar.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.