- This topic has 1 reply, 2 voices, and was last updated 13 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Help/Technical Questions › Nano Soul Preacher no sound
Hey all, I’m trying to fix a nano soul preacher for a friend. My friend was playind with the SP and all of a sudden it stopped working literarly. When it is switched off since it is a true bypass, the unprocessed signal flows and can be heard through the amp but once the SP is on, there is no sound at all.
I first checked the 3pdt switch which works like a charm, so nothing there.
Both D.C. and battery work
Had a small problem with the volume pot which I changed to a B10K instead of the original A10K, so its linear it still does the job.
Still the nano SP doesn’t work, any hints on where else to look. Is there a schematic explaining what each electronic part is used at least as a block diagran?
Cheers in advance…
Try asking Chip:
Chip “Scooter” Dugan:
1-800-633-5477 (US and Canada only) or +1-718-937-8300