Home › Forums › Help/Technical Questions › Nano Small Stone – power issue

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 2, 2008 at 10:02 pm #77325
    hilikus
    Member

    Hey guys, first post!
    So my Nano Stone is not properly working, it only powers and works on a battery, I’ve tried powering it with generic, EHX, Analogman and One-Spot adapters with no luck, I can’t recall exactly when this started to happen since I powered with an adapter just a few times, everytime I plug any kind of adapter in, it lets the bypass signal go through, but I get a volume drop with no effect when engaged.
    Any help (I just hope it’s a simple matter to fix since I’m in Peru and nowhere a qualified tech) would be greatly appreciated

    December 2, 2008 at 10:08 pm #88094
    chisa
    Participant
    Quote:
    Hey guys, first post!
    So my Nano Stone is not properly working, it only powers and works on a battery, I’ve tried powering it with generic, EHX, Analogman and One-Spot adapters with no luck, I can’t recall exactly when this started to happen since I powered with an adapter just a few times, everytime I plug any kind of adapter in, it lets the bypass signal go through, but I get a volume drop with no effect when engaged.
    Any help (I just hope it’s a simple matter to fix since I’m in Peru and nowhere a qualified tech) would be greatly appreciated

    sounds like a bad connection in the pedal along the power supply input. if it works with a battery i would take the back off and check the connection from teh dc power input to the circuit board.

    December 2, 2008 at 10:31 pm #88101
    hilikus
    Member

    I will do ASAP, I never actually got around to do so in fear of damaging it to a further level while taking it apart.

    December 2, 2008 at 10:35 pm #88105
    electro-melx
    Moderator

    you’ll be ok, just be careful…..have a look if anything appears obviously broken.

    October 16, 2013 at 2:17 pm #119411
    amagras
    Participant

    Hi, my solution for this problem was to place a battery (empty or new) and the DC in started working again. I hope this can help you too.

    Cheers,

    Andrei Martinez Agras

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.