Hi folks, I followed this diagram [and accompanying notes] from EH and true bypassed my old Mini Q-TRON as the dpdt finally gave out after many problem free years. The mod works great but the status led no longer works.Can somebody tell me how/where to hook up an led to this diagram?The notes that accompanied the diagram dont seem to address this and the led in the stock location no longer works.
Thanks in advance!!!!!!!

http://i748.photobucket.com/albums/xx124/czech-one-2/layoutandnotes.png
NOTES:
A-white wire to dc jack +
B- not used
C-yellow to pin 1 of 3pdt
D- green to pin 7
E- purple to pin 9
F- blue to pin 4
G- black to input jack ground
H- black to footswitch pin 8
I- black to output jack ground
orange footswitch wire pin 5 to output jack +
pin 2 to input jack +
Add a jumper wire between pins 3 and 6 of the 3pdt footswitch

7 – 4 – 1 –

8 – 5 – 2 –

9 – 6 – 3 –