Home › Forums › Help/Technical Questions › Mig 50 (First Reissue, not the MKII) Standby Switch Procedure

Tagged: ,

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 25, 2024 at 12:49 pm #210858
    noisekarma
    Participant

    Hi, I have the first version of the Mig 50 reissue (not the MKII). I noticed in the manual for my version to turn the standby switch on before turning on the power switch. Is this correct? Other tube amps I’ve had were power switch first then standby switch (the MKII manual has this as well). Can anyone from Electro-Harmonix clarify? I’ve tried emailing but never received a response. Thanks!

    July 26, 2024 at 9:44 am #210859
    EHX STAFF
    Keymaster

    Did you write info@ehx.com
    Also check your spam folder.
    Sometimes their answers go there.
    If not I will re send this to them.

    July 26, 2024 at 10:59 am #210860
    noisekarma
    Participant

    Actually I sent the message via the ehx website form (https://www.ehx.com/support/). Please help to get my question to someone who would know. Thanks!

    July 29, 2024 at 9:32 am #210880
    EHX STAFF
    Keymaster

    It is fine to leave the Standby switch in the off position while the MIG-50 powers up, and then several seconds later, engage the Standby switch.
    At the time we released the manual with instructions to engage the Standby switch before the Power switch, we were having trouble with failures in the power supply circuit, and we believed the Standby circuit might have been part of the problem. We have since determined the Standby switch was not the problem.

    July 29, 2024 at 10:55 am #210881
    noisekarma
    Participant

    What did you determine caused failures in the power supply circuit?

    July 29, 2024 at 12:38 pm #210882
    EHX STAFF
    Keymaster

    It was fixed before release. For more info Please write info@ehx.com

    • This reply was modified 4 months, 3 weeks ago by EHX STAFF.
  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.