Home › Forums › Help/Technical Questions › MICRO SYNTH SUSTAIN NOT ENOUGH

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 28, 2013 at 5:20 pm #83131
    MoFuz
    Member

    I really love running my MicroSynth into a Fuzz pedal but It is very frustrating as no matter how I set the trigger I can only get it to sustain for a very short period (maybe a second or a second and a half) before it cuts all the sound off. This also makes it impossible to roll back my volume while using the MicroSynth as it just gets choppy or shuts off. Of course I have tried running the Fuzz before the MS and that helps for sustain but the effect of the MS is compromised greatly. Any suggestions , mods ?

    September 2, 2013 at 1:41 am #119331
    companyman
    Participant

    Put a compressor before the Microsynth, I use a Pigtronix Philosophers Tone and it will sustain nearly forever.

    September 3, 2013 at 3:18 pm #119335
    MoFuz
    Member

    I certainly have tried putting a compressor in front which helps with sustain but adds a lot of noise. The Pigtronix PT claims to be very quiet….is it?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.