Home › Forums › Help/Technical Questions › Micro Pog replacement pot. and switch swap

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 19, 2011 at 8:58 pm #81868
    -=- * -=-
    Participant

    wondering if anyone can tell me the model and a source to purhchase a replacement pot for my micropog. the center pot on mine recently got damaged.

    also, wondering if anyone know’s of anyone out there that will swap the loudy “clacky” switch on the micro pog for a “soft switch”.

    i looked into doing it myself w/ either one of these or one of these, but once i opened up the micro pog, understanding which contact went to what was a little over my head…

    August 22, 2011 at 6:19 pm #115690
    -=- * -=-
    Participant

    nobody out there knows?

    especially about the replacement potentiometer? i really need to fix this pedal since i use it a lot, and i’d rather not send it in since i can easily swap out a pot myself.

    August 23, 2011 at 9:55 pm #115672
    -=- * -=-
    Participant

    ok, if no one knows the exact replacement part for the micro pog potentiometers, can anyone at least tell me if this would work: http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_264402_-1

    the ohm rating, taper, and type of shaft are the same, but how important is the watt rating of the potentiometer, since i can’t tell what it is on the original?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.