Home › Forums › Help/Technical Questions › Memory Toy Ineffective When Plugged In

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 9, 2010 at 8:51 pm #80979
    jonpaghiz
    Member

    Hi. I have a problem with my Memory Toy(just bought last month). When I plugged in, no sound effect, even though the LED is on. But no problem rise for my Little Big Muff when using the same adapter. Why is this happen? Should I remove the battery before using power supply? Please give me any suggestion because I use Memory Toy extensively.

    Thank you.

    November 9, 2010 at 11:24 pm #112492
    The EH Man
    Moderator

    Sounds more like there’s a problem with the Memory Toy.

    November 10, 2010 at 1:06 am #112497
    SanquiFlerb
    Member

    Wasn’t it the memory toy that had 2 pcbs that sometimes were a little bit loose? If I’m right, adjusting them in place should solve the problem.

    November 10, 2010 at 1:47 am #112499
    The EH Man
    Moderator

    You could try that. There is a small board with the delay ICs that plugs into the main board.

    November 10, 2010 at 3:38 am #112504
    jonpaghiz
    Member

    Thank you for respond. Before using adapter, Memory Toy works perfectly on battery. But after a month, the battery drain(yes, I always use it). That is why I plugged in, but come at worst the effect gone. OK Since I’m not so technical person, maybe I go to the shop and ask them to adjust the PCB.

    November 10, 2010 at 10:43 am #112509
    The EH Man
    Moderator

    Try it again with the battery and see if it works.

    What adapter are you using on it?

    November 13, 2010 at 11:18 pm #112566
    jonpaghiz
    Member

    problem solved. yeah adapter problem. now i’m using DC Brick to connect to all my 5 pedals. thank you for all of your kind help. :)

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.