Home › Forums › Help/Technical Questions › MEMORY BOY WON’T WORK WITH BATTERY

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 10, 2009 at 3:21 am #78791
    modalmood
    Member

    My brand new Memory Boy is completely dead with a 9v battery. (Yes. A new battery). No sound, No LED, no nothing. Press again and the bypass signal shoots right through. It works fine with the power supply. Has anyone had this problem on this or any other pedal? Thanks.

    September 10, 2009 at 3:08 pm #101345
    The EH Man
    Moderator

    I’d say the problem lies in either your battery connector (most likely) or the DC jack.

    September 11, 2009 at 6:43 am #101361
    ORKofStomp
    Member

    You didn`t use a cable with a stereoplug at the input of the boy by accident instead of a mono one, did you?

    September 11, 2009 at 6:45 am #101362
    modalmood
    Member
    Quote:
    You didn`t use a cable with a stereoplug at the input of the boy by accident instead of a mono one, did you?

    I used the power supply supplied with the unit.

    September 11, 2009 at 6:46 am #101363
    modalmood
    Member
    Quote:
    Quote:
    You didn`t use a cable with a stereoplug at the input of the boy by accident instead of a mono one, did you?

    I used the power supply supplied with the unit.

    Oh at the input. sorry. no i didn’t. i used the same cables i always use with a myriad of stomp boxes.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.