Hi! i’m new to ehx products having gotten a memory boy for christmas. The pedal sounds great but i noticed that it wasn’t getting anywhere near the 550ms delay time when i had the included power supply plugged in. I use a one spot power supply with a daisy chain to power all my other pedals and i pluged my memory boy into that and the delay time was a little longer, but not much. After that i put a new 9v battery in and the delay time was perfect. I basically got the pedal with the intent of using the 550 setting all the time so its something i have to have and i can’t afford to put a fresh battery in the pedal every few weeks. Has anyone else experienced this problem? And is there anything I can do to fix it?

Also i run a pretty big line of stomp boxes through the effects loop of a carvin legacy combo. I run a boss delay/reverb a hardwire delay and a hardwire reverb the memory boy a boss chorus ensemble and a bbe sonic maximizer and i plan on getting an ehx stereo electric mistress so I need to get a signal booster. I was looking to get the bbe boosta grande but then i noticed that ehx had the lpb-1 at half the price. I’m just a little concerned because it said that it is basically a replica of a pedal they made in the 60’s and 70’s. Would the lpb-1 be just as good as the boosta? also i was wondering where in my effects chain i should run the boost pedal. i was thinking i would run the pedals that i use for more subtle effects in the front of the chain and put the booster in the middle and run the pedals i wanted to be more obvious and have more power after the booster. Would that work or would it just put too much power through the pedals i run after it and burn them out?