Home Forums Help/Technical Questions MEL 9 only works in SYMPHONIC mode

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #131462
    HENRY LOWMAN
    Participant

    GOOD DAY to you! I haven’t given my pedals much use these past 15 months and was rather perplexed uopn plugging my MEL9 in the other day to find that it only works in SYMPHONIC mode. I previously used it maybe 5 months ago with no problems (ALL 8 settings worked fine). I have tried unplugging the pedal, holding the power switch down and plugging it back in but, alas, NO change. The knob seems to be working fine (clicking between each setting). I should point out that this pedal has not had HEAVY use, just in occasional open mic performances prior to the pandemic as well as home recording. This issue just happened out of the blue. Thank you.

    #131471
    EHX STAFF
    Keymaster

    Henry
    Sorry to hear this, but sounds like it needs to be serviced.
    First make sure you are using the EHX power supply. If so please contact the service techs at:
    info@ehx.com
    They can have this fixed for you fast and cheap.

    #197183
    Cantaro Sinfonico
    Participant

    Hi EHX. I had the same issue as OP.

    I sent you an email recently, I hope you can reply soon. ?

    Anyway, is there anything I can do by myself to fix the issue?

    Thanks in advance!

    #197247
    EHX STAFF
    Keymaster

    No sorry it is not user serviceable.
    If you do not hear back from the techs please check your spam folder.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.