Home › Forums › Help/Technical Questions › LPB 2UBE over-heating.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 17, 2020 at 11:06 am #86266
    stephen_g
    Member

    I have an EHX LPB 2UBE that appears to be over heating. The unit works OK, and I have run it on test for 2-3 hours, but it feels just a little too warm to the touch.(That is my impression anyway).
    It may be normal for these units. If anyone can advise I would appreciate it.
    It has a new EHX power supply, and new valves, still feels a little too warm though. (30-35 degrees C case temp adjacent to the internal transformer and heat sink).

    Stephen

    May 17, 2020 at 2:46 pm #126083
    EHX STAFF
    Keymaster

    The unit has tubes and running at a high voltage so it will get hot. Mine does. please write the techs on Monday at.

    info@ehx.com

    May 18, 2020 at 8:14 am #126085
    stephen_g
    Member

    Thanks will do.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.